ARCCAPTAIN CUT50 Plasma Cutter Dual Voltage HF Start Cutter

Plasma Cutter CUT50 [https://cdn.shopifycdn.net/s/files/1/0613/8458/9369/files/1.jpg?v=1668656723] This Arccaptain CUT50 is very portable and easy to carry to the work. And it works very well at cutting 1/2in sheet metals. For such a small machine, this device can cut clean through the 1/2in and be easy used for multiple applications. The large LED display is great while in operation so you don't need to take off your helmet to read the power output. The device is very easy to use and setup and even comes with a handle for portability. The Portable Plasma Cutter CUT50 is equipped with over-heat, over-current, over-load and over-voltage protection. It also has an automatic cooling fan and vents to discharge the heat generated effectively. This plasma cutter is widely used for cutting alloy steel, stainless steel, copper, mild steel And Other Color Metal Materials. HIGH FREQUENCY PLASMA CUTTER With high speed and precision cuts combined with low cost, air plasma cutter is suitable for stainless steel, alloy steel, mild steel, copper, aluminum and other metal materials. Compare with oxyhydrogen cutting, plasma cutting is much more safefy, quick, low cost and easy to use. Cutting Thickness Chart :   Need to adjust the current and air pressure properly under metal thickness to get best cutting surface. The set up guide here [https://www.arccaptain.com/blogs/article/plasma-cutter-suggested-amperage-air-setting-cutter] Cut50 setting parameter guide [https://cdn.shopify.com/s/files/1/0613/8458/9369/files/Cut50setupguide.jpg?v=1689321561] Notice: 1. Due to the difference between different monitors, the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the pictures. 2. Due to the different personal measuring techniques, there might be 1-3cm error of the physical.  plasma cutter Cutting thickness [https://cdn.shopifycdn.net/s/files/1/0613/8458/9369/files/5.jpg?v=1668656771] Parameter Brand ‎ARCCAPTAIN Voltage ‎110/220 Volts (DC) Power Source ‎Dc Special Feature ‎Portable, Easy to Install, Waterproof, Adjustable Color ‎Black/Red Item Dimensions LxWxH ‎13 x 6 x 8 inches Manufacturer ‎ARCCAPTAIN Part Number PT-31 CUT TORCH ‎CUT50  Item Weight ‎10.48 pounds Product Dimensions ‎13 x 6 x 8 inches Batteries Included? ‎No Batteries Required? ‎No Portable Plasma Cutter CUT50 panel [https://cdn.shopifycdn.net/s/files/1/0613/8458/9369/files/6.jpg?v=1668656700] * LARGE DIGITAL LED DISPLAY: Exclusive Large LED design, provides you with accurate data display and helps you read all data easier and more clearly without taking off your helmet. * POWERFUL CUTTING: Automatic dual-voltage 110/220V. This plasma cutter features high-frequency arc starting mode, efficiently cuts through rough, painted, and rusty surfaces and produces minimal slag. With advanced IGBT inverter technology, the maximum severance cut can reach up to 3/4" (20 mm), 1/2" (10mm) ideal clean cut, 60% duty cycle. Suitable for alloy steel, stainless steel, mild steel, copper, aluminum, etc. * POST FLOW TIME & 2T/4T: When you stop cutting, the air runs on for a minute to cool the consumable of the plasma cutter torch, the adjustment range is 5-15 seconds, which can greatly extend the working life of consumables. 2T/4T function meets your different needs, suitable for continuous long-term cutting. * SETUP WITHIN 30s: Built-in regulator and gauge help you to get rid of tedious installation anymore. Only takes 30 seconds and you can start cutting. You can also read the air pressure value through the air gauge, the recommended air pressure value is 40-70 PSI. * PORTABLE & LIGHTWEIGHT: This plasma cutter machine only weighs 13 pounds, easy to carry with handle or shoulder strap (strap included). WHAT'S IN THE BOX: * 1 * ARCCAPTAIN Plasma Cutter * 1 * 16FT PT-31 Cutting Torch * 1 * 10FT Earth Clamp * 1 * 10FT Air Hose * 1 * 110/220V Power Adapter * 1 * User Manual * 1 * Shoulder Strap * 1 * Electrode Nozzle, * 1 * Diverter * 1 * Ceramic Cup WHERE DO I GET ELECTRODES AND AIR CAPS the electrodes and air caps for cut 50 are universal, you can easily find replacement parts online. You just need to find the parts for PT-31 cut torch online. The plasma cutter CUT50 from the ARCCAPTAIN factory passed 300+ Authoritative Laboratory tests in simulating extremely harsh environments including： * Vibration Test * Drop Test * Waterproof Test * Metal Dust Test * Prolonged Load Test * Conducted Interference Test * High-low Temperature Test * Power Switch Durability Test * Water Spray Test * Transportation Simulation Test If you meet the problems in the process of using machine, please contact us for help.