Aquarius Water System Replacement Filter Pack

Replacement Filter Set Suits the Aquarius Alkaline Ionised Water System Includes Filter A PP Sediment Filter Removes Rust, Dirt, Coarse Sand, Scale, Sand, Silt and Others. Filter B GUR Fluoride Filter Removes fluoride, VOCs, heavy metals, Un-natural Tastes and Odours found in tap water. Filter C KDF Filter Addresses heavy metals, hydrogen sulfide and chlorine. Inhibits bacterial growth. Filter D UF Membrane Effective removal of impurities above 0.01 microns, bacteria, viruses, crypto, pesticides, rust and metallic trace elements. Filter E Hydro Filter Provides Hydrogen rich water and essential minerals to create alkaline ionised water. Replace every 12 Months. *Filter Life may vary depending on water usage and water source. Please note, we have noticed that in Western Australia, water filters need replacing sooner than recommended. AQUARIUS WATER SYSTEM FILTER REPLACEMENT GUIDE The new upgraded replacement filters will still fit in your system. The new filters are shorter but are much stronger and filter even better. They are also simpler to install now, start by turning the water off to the unit. Then simply open the unit cover, start from the INLET plug with Filter A, then Filter B, then C, D and finally Filter E, which will connect to the OUTLET plug. The remove your old filters, there’s a ring around the elbow plug, simply push that ring in towards the plug and push the plug away from the filter and it will easily come off. To Connect to new filters, simply push the elbow plug into the new filter making sure it's all the way in. THAT’S IT. PS: Please watch the video below on how to remove the filters / elbow connectors. https://youtu.be/YrU3YyEaKuw How to remove the plugs from the Aquarius Unit: https://www.youtube.com/watch?v=zfayYSnodYk How to remove the elbow connectors: https://www.youtube.com/watch?v=YrU3YyEaKuw How to change the filters of the Aquarius Unit: https://www.youtube.com/watch?v=NNHpxtaZ0xc&t=27s